Using SelecType
This section d escribes basic operations in SelecType. Fol low
these steps to change the default settings:
1. Turn on the printer.
2. Press SelecType to enter the SelecType mode.
❑Pressing the button once allows you to enter SelecType
Level 1. The display shows:
❑Pressing the button twice allows you to enter SelecType
Level 2. The display shows:
Note:
Pressing SelecType three times consecutively exits SelecType
and returns the printer to a standby state.
3. Press the
r button to enter the setting menu of the selected
level. The display shows the first setting as follows:
❑When you enter Level 1, the display shows:
❑When you enter Level 2, the display shows:
4
R
Maple Rev.D
A5 size Chapter 4
97/06/17 pass 0
Controlling the Printer 4-9