Using Sin gle She ets
Your printer can print on single sheets of paper from 92 to
420 mm (3.6 to 16.5 inches) wide. See page A-4 for detailed
single-sheet paper specifications.
You can load one sheet of paper at a time in the front or rear
paper guide, or you can load a stack of paper in the optional
cut-sheet feeder. (See page 6-2 for more information on the
optional cut-sheet feeder.)
Note:
If you load long paper (for example, legal size paper), leave enough
space at the back of the printer so that the paper is not obstructed.

Loading single sheets from the front

1. Make sure the front paper guide is attached as described on
page 1-8. Then close the tractor unit sprocket covers located
on the back of your printer and push down the sprocket
lock levers to lock the sprocket units in place.
2. Set the paper release lever to the single-sheet position as
shown below.
3. Turn on the printer. The Power light comes on.
Me-47
3
R
Maple Rev.D
A5 size Chapter 3
97/06/17 pass 0
Paper Handling 3-7