Installing EPSON Status Monitor 2

Note:

If you installed the EPSON Status Monitor 2 when you installed the printer software, you do not need to install again.

To install the Status Monitor, follow these steps:

1.Make sure Windows is running. Insert the printer software CD-ROM in the CD-ROM drive. (For printer software floppy disk users, insert the floppy disk in a disk drive.)

2.If a dialog box appears, click Quit.

3.Click Start, and select Run.

4.Type D:\status2.

5. Click OK, then follow the instructions on the screen.

6

 

Note:

 

If the dialog box below appears, and if your printer is connected directory

 

to your computer, select Monitor local printers. If it is connected through

 

a network, select Monitor Windows shared printers. Then click Next.

 

After you install EPSON Status Monitor 2 and restart your

 

computer, the Status Monitor starts automatically and adds a

 

printer-shaped background monitoring icon to the taskbar at the

 

bottom of your computer screen. This icon appears only when the

 

Status Monitor is active.

 

Using EPSON Status Monitor 2 6-3