Selecting the paper source (bin 1 or bin 2)

When the double-bin cut-sheet feeder is installed, you need to select the paper source (bin 1 or bin 2) using your application or the printer’s control panel. As shown below, the high-capacity cut-sheet feeder is bin 1 and the second-bin cut-sheet feeder is bin 2.

bin 1: high-capacity cut-sheet feeder

bin 2: second-bin cut-sheet feeder

It is best to select the paper source in your application program because software settings usually override the printer’s control panel settings. However, if you cannot select the paper source in your application, press the Tear Off/Bin button until the lights indicate the bin you want as shown below. When the printer receives data, it automatically loads paper from the bin you select.

on Bin 1 (the high-capacity cut-sheet

feeder) is selected.

no Bin 2 (the second-bin cut-sheet feeder) is selected.

n= on, o = off

A-10Enhancing Your Printer With Options