Installing the tractor in the pull position

To install a tractor in the pull position you must either remove the front push tractor or install the optional pull tractor (C80032✽).

To remove the front push tractor, see “Removing the front push tractor” on page 2-15.

Note:

The tractor in the rear push position cannot be removed.

To install a tractor in the pull position, follow these steps:

1.Make sure the printer is turned off. Lift the printer cover up and off the printer.

2.Push up the tabs on each side of the paper tension unit and lift the unit up and off the printer. Store the paper tension unit in a safe place.

2-22Printing on Continuous Paper