Removing the printed document from the rear push tractor

To remove the printed document, follow these steps:

1.Make sure the Tear Off/Bin lights are flashing. (This indicates your paper is at the current tear-off position). You may need to press the Tear Off/Bin button to advance the paper to the tear-off position.

2.Open the paper guide cover, and tear off the printed document using the tear-off edge of the printer.

Note:

If your paper’s perforation is not properly aligned with the tear-off edge, you can adjust the tear-off position using the micro adjust feature. See “Adjusting the tear-off position” on page 2-40.

cCaution:

Never use the knob to adjust the tear-off position; this may damage the printer or cause it to lose the tear-off position.

3.Close the paper guide cover.

When you resume printing, the printer automatically feeds the paper back to the top-of-form position and starts printing.

2-20Printing on Continuous Paper