15 to 25°C (59 to 77°F)
30 to 60% RH
Printing on Single Sheets

cCaution:

Because printing on the edge of an envelope may damage the print head, make sure the printing stays entirely within the printable area of your envelopes. See Appendix C for details on the printable area of envelopes.

Loading postcards

You can load postcards one at a time in the top or front paper

3

slot as described in “Loading Single Sheets in the Top Paper Slot” (on page 3-8) or “Loading Single Sheets in the Front Paper Slot,” (on page 3-10). Also, follow these guidelines:

If you load postcards long edge first, always load them in the top slot.

Set the paper thickness lever (located under the printer cover) to position 2.

Before printing, turn on the card mode by pressing the Tear Off/Bin button until both Tear Off/Bin lights are on.

After you finish printing on postcards, press the Tear Off/Bin button once to exit the card mode. (Bin 1 is selected.)

Use postcards only under normal temperature and humidity conditions, as follows:

Temperature

Humidity

3-7