Switching Between Printing on Continuous Paper and Printing on Single Sheets

You can easily switch back and forth between printing on continuous paper with a push tractor and printing on single sheets without having to remove or reload paper.

Switching to printing on single sheets

To switch from printing on continuous paper with the front or rear push tractor to printing on single sheets, follow the steps below.

Note:

❏If continuous paper with labels is loaded in the printer, remove it before switching to single-sheet printing. See “Removing continuous paper with labels” on page 2-7.

❏If a tractor is in the pull position, remove any continuous paper from it before switching to single-sheet printing. See “Removing paper from the pull tractor” on page 2-29.

1.If any printed pages of continuous paper remain in the printer, press the Tear Off/Bin button to advance printed pages to the tear-off position, and then tear them off.

c Caution:

❏Tear off your printed document before you press the

Load/Eject button in the next step. Reverse feeding several pages at a time may cause a paper jam.

❏Never use the knob to eject paper while the printer is on; this may damage the printer or cause it to lose the tear- off position.

2-34Printing on Continuous Paper