Removing the front push tractor
To remove the tractor from the front push position, follow these steps:
1. Remove any paper from the tractor as described in the | 2 |
previous section. |
|
2.Turn off the printer.
3.Open the front paper guide by pulling the tab at the center of the guide. Then remove the guide by grasping both sides and pulling it straight out of the printer.
4.Press the tractor’s lock tabs, tilt the tractor up, and lift it out of the printer.
5.Replace the front paper guide by sliding it along the printer’s mounting slots until it locks in place. Then close the front paper guide.
Printing on Continuous Paper