2.

Press the Load/Eject button to feed the continuous paper

 

 

backward to the standby position. The paper is still attached to

 

 

the push tractor but is no longer in the paper path.

 

 

 

 

3.

Load single sheets in the top or front paper guide as described

2

 

in Chapter 3.

 

 

 

Switching to printing on continuous paper

To switch from printing on single sheets to printing on continuous paper with the front or rear push tractor, follow these steps:

1.If a single sheet remains in the printer, press the Load/Eject button to eject it.

c Caution:

Never use the knob to eject paper while the printer is on; this may damage the printer or cause it to lose the top-of-form position.

2.Make sure that the tractor is installed in the front or rear push position which you plan to use. To install the tractor in the front position, see page 2-8.

3.Load continuous paper onto the front or rear push tractor as described earlier in this chapter.

The printer loads your continuous paper automatically when you begin printing.

Printing on Continuous Paper 2-35