Removing paper from the pull tractor

1.After you finish printing, tear off the fresh supply of paper at the perforation nearest the paper entry slot.

2

2.Hold down the LF/FF button to eject the paper from the printer.

Using two tractors in a push and pull combination

To improve continuous paper feeding and reduce paper jams, you can use two tractors at the same time. When using two tractors in combination, you can load paper in the front paper slot onto both the front push tractor and the pull tractor, or in the rear paper slot onto both the rear push tractor and the pull tractor.

To use the front push tractor with the pull tractor, you need to purchase the optional pull tractor (C80032✽). The tractor in the rear push position cannot be removed. Install the optional pull tractor as described in “Installing the tractor in the pull position” on page 2-22.

To use the rear push tractor with the pull tractor, you can remove the tractor from the front push position as described on page

2-15, and install it in the pull position as described on page 2-22.

Note:

The tractor in the rear push position cannot be removed.

Printing on Continuous Paper 2-29