Loading Single Sheets in the Top Paper Slot

To load paper in the top slot, follow these steps:

1.Make sure the paper guide is installed properly. If not, attach it as described on page 1-11.

2.Open the paper guide cover. Slide the left edge guide until it locks in place next to the arrow on the paper guide. Next adjust the right edge guide to match the width of your paper.

3.Set the paper release lever to the single-sheet position. Also set the paper thickness lever (located under the printer cover) to the proper position for your paper’s thickness. (See the table on page 3-3.)

3-8Printing on Single Sheets