The printout has extra blank lines between lines of text.
Cause | What to do |
Two line feed commands are being sent at the end of each line of text.
Turn off the auto line feed setting using the printer’s
The line space setting in your application software is incorrect.
Adjust the line space setting in your application software.
The | Turn off the |
setting is on. | setting in the |
| the EPSON Remote! utility. See |
| “About Your Printer’s Default |
| Settings” in Chapter 5, or “Using the |
| EPSON Remote! Utility” in Chapter 4. |
The printer prints strange symbols, incorrect fonts, or other inappropriate characters.
Cause | What to do |
|
|
Your printer and computer | Make sure that you are using the |
are not communicating | correct interface cable and that the |
correctly. | communications protocol is correct. |
| See page |
| documentation. If you installed an |
| optional serial interface card, also see |
| page |
The wrong character table is selected in your software.
Select the correct character table using your software, the