State of | Beep | Problem |
panel lights | pattern |
|
Solution | ||
|
|
|
f Paper Out | ••• | Continuous paper is not fed to the standby position. |
n Pause |
|
|
| Tear off the printed document at the perforation; then | |
|
| |
|
| press the Load/Eject button. The printer feeds the paper |
|
| to the standby position. Press the Pause button to turn off |
|
| the Pause light. |
|
|
|
| ••• | A single sheet of paper is not fully ejected. |
|
|
|
|
| Press the Load/Eject button to eject the sheet. Then press |
|
| the Pause button to turn off the Pause light, if necessary. |
|
|
|
| ••• | Paper is jammed in the printer. |
|
|
|
|
| Clear the paper jam as described on page |
|
|
|
f Pause | – | The print head is overheated. |
|
|
|
|
| Wait a few minutes; the printer resumes printing |
|
| automatically once the print head cools. |
|
|
|
f Paper Out | – | An unknown printer error has occurred. |
f Pause |
|
|
| Turn off the printer and leave it off for several minutes; then | |
f f |
| |
| turn on the printer again. If the error recurs, contact your | |
Tear Off/Bin |
| |
| dealer. | |
f f Font |
| |
|
| |
|
|
|
n= on, f = flashing
•••= short series of beeps (three beeps), ••••• = long series of beeps (five beeps)
Note:
The printer beeps once if you press a control panel button when the corresponding function is not available.
7
Troubleshooting
Troubleshooting