6.As shown below, set the cut-sheet feeder’s paper type levers to the proper position for the paper you will load: single-sheet paper or postcards and envelopes.

Note:

Always set the paper type levers before you load paper.

envelopes or postcards

single-sheet paper or single-sheet multi-part forms

7.Pull both paper set levers forward until the paper guides retract and lock open to allow paper loading.

8.Take a stack of paper (up to 150 sheets of plain paper) and fan it. Next, tap the side and bottom edges of the paper on a flat surface to even up the stack.

9.Insert the paper stack printable side down along the left paper guide.

A-8Enhancing Your Printer With Options