Epson P910C manual 19

Using the push and pull tractors in combination

To improve continuous paper feeding and reduce paper jams, you can use two tractors at the same time. This is especially helpful for printing on continuous pre-printed forms, multi-part forms, or labels, and for printing high quality graphics. When using two tractors in combination, you can load paper in the front paper slot onto the front push tractor and the pull tractor, or load paper in the rear paper slot onto the rear push tractor and the pull tractor.

Combination	Description
	To use the rear push tractor with the pull tractor, you
	need to remove the standard tractor that comes in
	the front push position and install it in the pull
	position.
	Note:
	Because thick multi-part forms require a straight
	paper path, load them in the front slot.

rear push	Caution:
and pull	Do not load continuous paper with labels onto
	the rear push tractor even when it is used in
	combination with the pull tractor. If you load
	continuous paper with labels onto the rear push/pull
	tractor, the labels may come off their backing sheet
	inside the printer and cause a paper jam.
	To use the front push tractor with the pull tractor, you
	need to purchase the optional pull tractor
	(C80032✽) and install it in the pull position.

front push

and pull

Note:

For more information on using two tractors in a push and pull combination, see page 2-29.

7Getting to Know Your Printer