Epson WF-2630 manual Network Software Cannot Find Product on a Network, Related topics

Models: WF-2630

1 256
Download 256 pages 47 Kb
Page 202
Image 202

Related topics

Wi-Fi Networking

Network Software Cannot Find Product on a Network

If EpsonNet Setup cannot find your product on a network, try these solutions:

Make sure your product is turned on and connected to your network. Verify connection using your product control panel.

Check if your network name (SSID) contains non-ASCII characters. Your product cannot display non- ASCII characters.

Make sure your product is not connected to a guest network.

If necessary, reinstall your product software and try running EpsonNet Setup again:

1.Reset your product's network settings to their factory defaults.

2.Windows only: uninstall your product software.

3.Initialize your router following the instructions in your router documentation.

Note: If you are reading these instructions online, you will lose your Internet connection when you initialize your router, so note the next step before initializing it.

4.Download your product software from the Epson website using the instructions on the Start Here sheet.

If you have replaced your router, reinstall your product software to connect to the new router.

Note: If you are using a 5 GHz wireless router, set the router to operate in dual band (2.4 GHz and 5 GHz) mode. See your router documentation for instructions.

Parent topic: Solving Network Problems

Related concepts

When to Uninstall Your Product Software

Related topics

Wi-Fi Networking

202

Page 202
Image 202
Epson WF-2630 manual Network Software Cannot Find Product on a Network, Related topics