Enabling Wi-Fi Direct Mode

You can enable Wi-Fi Direct mode to allow direct communication between your product and a computer or other devices without a wireless router or access point.

1.Press the up or down arrow button, select Wi-Fi Setup, and press the OK button. You see this screen:

2.Press the down arrow button, select Wi-Fi Direct Setup, and press the OK button.

3.Press the down arrow button, select Connection Setup, and press the OK button.

4.Press the down arrow button, select Change Password, and press the OK button.

5.Press the up arrow button.

Note: If you have already connected devices or computers to your product via Wi-Fi Direct, they will be disconnected when you change the password.

33

Page 33
Image 33
Epson WF-2630 manual Enabling Wi-Fi Direct Mode