Epson WF-2630 manual Solving Paper Problems, Product Makes Noise When It Sits for a While

Models: WF-2630

1 256
Download 256 pages 47 Kb
Page 206
Image 206

Product Makes Noise When It Sits for a While

Your product is performing routine maintenance. This is normal.

Parent topic: Solving Copying Problems

Solving Paper Problems

Check these sections if you have problems using paper with your product.

Paper Feeding Problems

Paper Jam Problems Inside the Product

Document Jams in the Automatic Document Feeder

Paper Ejection Problems

Parent topic: Solving Problems

Paper Feeding Problems

If you have problems feeding paper, try these solutions:

Place the product on a flat surface.

If paper does not feed for printing, remove it. Then reload it in the rear paper feed against the right side and beneath the tab. Slide the edge guide against the edge of the paper.

If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.

If paper jams when you print on both sides of the paper, try loading fewer sheets.

Make sure your paper meets the specifications for your product.

For best results, follow these guidelines:

Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.

Load paper in the rear paper feed printable side up.

Follow any special loading instructions that came with the paper.

Parent topic: Solving Paper Problems

Related references

Paper Jam Problems Inside the Product

Document Jams in the Automatic Document Feeder

Paper Loading Capacity

206

Page 206
Image 206
Epson WF-2630 manual Solving Paper Problems, Product Makes Noise When It Sits for a While, Paper Feeding Problems