Epson WF-2630 manual Image is Distorted or Blurry, Image Colors are Patchy at the Edges

Models: WF-2630

1 256
Download 256 pages 47 Kb
Page 228
Image 228

Image is Distorted or Blurry

If a scanned image appears distorted or blurry, try these solutions:

Make sure your original is not wrinkled or warped. This may prevent the original from laying flat on the scanner glass.

Do not move your original or your product during scanning.

Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that extends beyond the base of the product in all directions.

Adjust these Epson Scan settings (if available) and try scanning again:

Select the Unsharp Mask setting.

Adjust the Auto Exposure setting.

Increase the Resolution setting.

Parent topic: Solving Scanned Image Quality Problems

Related topics

Selecting Epson Scan Settings

Image Colors are Patchy at the Edges

If you are scanning a thick or warped original, cover its edges with paper to block external light as you scan it.

Parent topic: Solving Scanned Image Quality Problems

Image is Too Dark

If your scanned image is too dark, try these solutions:

Adjust these Epson Scan settings (if available) and try scanning again:

Auto Exposure

Brightness

Histogram Adjustment

Check the brightness and contrast settings of your computer monitor.

Parent topic: Solving Scanned Image Quality Problems

Related topics

Selecting Epson Scan Settings

228

Page 228
Image 228
Epson WF-2630 manual Image is Distorted or Blurry, Image Colors are Patchy at the Edges, Image is Too Dark