IR Learning
The IR learning transceiver sensor on the MLC front or left side panel can receive and “learn” commands from the infrared remote controls of other devices via the MLC configuration software. IR Learning enables you to create an IR driver file to control the projector or input devices such as a VCR or DVD player. IR Learning of projector control codes is necessary only if there is no driver available for your projector or if you need to customize the driver.
The IR transceiver accepts infrared signals of 30 kHz to 60 kHz. Point the IR remote control directly at the transceiver for best results. The diagrams below indicate the best distances and angles at which to hold the remote control.
| 7 | 4 | 1 |
0 | 8 | 5 | 2 |
| 9 | 6 | 3 |
IR Learning
Transceiver
DISPLAY | |
ON | OFF |
VOLUME | |
MLC 62PC D FrontVIDEOPanel
Figure 35. IR Learning on an MLC D Model
IR Learning Transceiver
| 7 | 4 | 1 |
0 | 8 | 5 | 2 |
| 9 | 6 | 3 |
MLC 62 RS EU
and MLC 62 RS MK
Left Side Panel
Figure 36. IR Learning on an MLC 62 RS EU or MLC 62 RS MK
To set up the MLC for IR Learning, use the MLC configuration software (see the configuration software help file for the procedures).
MLC 60 Series MediaLink Controllers • Features, Installation, and Operation | 30 |
