Frymaster H52 Series warranty How to Change the Cooking Temperature Setpoint

3.Press and release the switch until the function to be changed (SHAKE, PULL, or QA) appears in the left display. The current time setting and automatic (AUTO) or manual (MAN) alarm cancel mode options appear in the right display.

NOTE: Shake Time refers to the programmed time at which the operator will be prompted by an audible alarm to shake the basket, but not stop the cooking process. Pull Time refers to the programmed time at which the product is fully cooked and at which the operator will be prompted by an audible alarm to remove the basket from the cooking oil. QA Time refers to the maximum time that a product may be held after the cooking cycle has completed.

NOTE: When the programmed time has elapsed, the automatic alarm-cancel mode (AUTO) audible alarm will sound three times and then stop. When the programmed time has elapsed, the manual alarm cancel mode (MAN) audible alarm will sound until the operator presses the cook switch ( 1 or 2 ) that was pressed to start the cooking cycle.

4.Press the right 2 switch to toggle between automatic alarm cancel mode (AUTO) and manual alarm cancel mode (MAN).

5.To change the times, use the following switches:

Left		Minutes (in increments of ten)
Left	1	Minutes (in increments of one)
Left	2	Seconds (in increments of ten)
Right	1	Seconds (in increments of one)

6.Press the switch to lock in the new settings, and either ON/OFF switch programming mode. Both displays will show OFF.

How to Change the Cooking Temperature Setpoint

1.Enter the program mode. See How to Enter the Program Mode on Page 3-10.

2.Press and release the switch until the menu item to be changed is displayed.

to exit the

3.Press the switch to show the cooking temperature setpoint, displayed as SET-TEMPin the left display. The current setpoint temperature is in the right display (for example-350F). The temperature will be in Fahrenheit (F) or Celsius (C). Pressing the right 2 switch toggles the computer between Fahrenheit (F) and Celsius (C).

4.To change the temperature, use the following switches:

Left

Left

Right

1

2

1

Hundreds

Tens

Ones

NOTE: The computer cannot be programmed for a temperature greater than 375°F (191°C).

5.Exit the program mode by pressing either ON/OFF switch .

3–11