Frymaster H52 Series warranty Converting to Another Gas Type, Gas Vat

WARNING

“Dry-firing” your unit will cause damage to the frypot. Always ensure that melted shortening, cooking oil, or water and boil-out solution is in the frypot before firing your unit for any extended period.

4.It is suggested that the burner manifold pressure be checked at this time by the local gas com- pany or an authorized service agent. Refer to “Check Burner Manifold Pressure” in Chapter 5 of this manual for the proper procedure. The accompanying tables list the burner manifold gas pressures for the various gas types that can be used with this equipment.

CE Standard

Burner Manifold Gas Pressures

for Fryers Manufactured After April 1999

	Pressure (mbar)
	Single	Dual
Gas	Vat	Vat
Natural Gas Lacq	7	7
(G20) under 20 mbar
Natural Gas Groningue *	10	10
(G25) under 25 mbar
Natural Gas Groningue	10	10
(G25) under 20 mbar
Butane	17	17
(G30) at 28/30 or 50 mbar
Propane	20	20
(G31) under 37 or 50 mbar

CE Standard

Burner Manifold Gas Pressures

for Fryers Manufactured Through April 1999

	Pressure (mbar)
	Single	Dual
Gas	Vat	Vat
Natural Gas Lacq	7	6,5
(G20) under 20 mbar
Natural Gas Gronigue *	10	9
(G25) under 25 mbar
Natural Gas Gronigue	10	9
(G25) under 20 mbar
Butane	17	16,5
(G30) at 28/30 or 50 mbar
Propane	20,2	18,5
(G31) under 37 or 50 mbar

* Belgian G25 = 7,0 mbar (single or dual)

* Belgian G25 = 7,0 mbar (single) or 6,5 (dual)

Non-CE Standard

Burner Manifold Gas Pressures

Gas	Pressure
Natural	3" W.C.
	0.73 kPa
Propane	8.25" W.C.
	2.5 kPa

5.Check the programmed temperature or analog controller thermostat setting. (Refer to Chapter 3, Operating Instructions, for the setpoint programming instructions for your particular controller.)

2.5Converting to Another Gas Type

Your fryer is configured at the factory for either natural gas or propane (LP) gas. If you desire to switch from one type of gas to another, a gas conversion kit must be installed by a Factory Authorized Service Center technician.

DANGER

Switching to a different type of gas without installing the proper conversion kit may result in fire or explosion! NEVER attach your fryer to a gas supply for which it is not configured.

2-7