3.Press the [SCAN] button.
ÖScanning starts.
ÖWhen the scanning is completed, Adobe Acrobat starts and displays the scanned images.
3.Set the Carrier Sheet onto the scanner.
Place the top of the sheet with the black & white printed pattern downwards, and load the document in the direction
HINT
● You can also use another application to display scanned images.
● Pressing [SCAN] button, the documents are scanned in the “Duplex” mode.
To scan the document in the Simplex” mode, change this setting using the ScanSnap Manager
of the arrow.
If you are using the Carrier Sheet for scanning, it is not possible to scan several sheets continuously. Please load
S.
●The ScanSnap scanner is able to scan documents using various settings. Refer to the “ScanSnap Operator’s Guide” on the “ScanSnap Setup
3.4.Scanning with the Carrier Sheet
If you use the Carrier Sheet, you can scan large documents such as A3/B4/11x17 size documents, and documents of irregular shapes such as clippings of newspaper.
Here, as an example, this section explains how to scan an
If you are scanning an A3 document, it is not possible to load it onto the scanner as it is. Fold the document in half and scan it following the procedure below.
1.Spread the page to be scanned facing outwards and fold it in half from the center.
Please fold it neatly so that the folded portion does not appear puffed.
the sheets one by one and scan.
4.Press the [SCAN] button.
ÖThe front and back image data are set in a
The loading method and ScanSnap Manager’s
HINT |
| settings differ according to the documents to be |
|
| |
|
| scanned. Refer to “ScanSnap Operator’s |
|
| |
|
| Guide” on the “ScanSnap Setup |
|
| details. |
|
|
|
3.5. Scanning Business Cards
1.Select “CardMinder” at [Application:] under the [Application] tab of the “Scan and Save Settings” window.
HINT
● When “CardMinder” is selected, only the [Application] and [Scanning] tabs are enabled.
2.Open the Carrier Sheet and place the folded document inside.
Align the top of the document to the top of the Carrier Sheet, and the folded portion to the
10
●Refer to the “ScanSnap Operator’s Guide” on the “ScanSnap Setup
2.Load the business cards onto the scanner. Adjust the side guides to the business card width.
Side guide
Business card
(Set it face down)
[SCAN] button
3.Press the [SCAN] button.
ÖScanning starts.
ÖThe “CardMinder” window appears and displays the recognized character data, name, company, and
