Fujitsu fi-5110EOX2 manual For Windows 2000, Windows XP, For Windows 98, ME

The rear side of the document appears	Is the "Setting for text only document."	Select the "Setting for text only document."
in the scanned image when scanning a	check box cleared at [Option...] on the	check box. (Available only in color mode)
double-sided document (noise of back	[Scanning] tab in the "Scan and Save	which makes characters, lines and contrasts
side image).	Settings" window?	appear sharp and clear, and the noise of the
		backside image is eliminated. Please note
		that you can use this mode also for
		documents including photos and
		illustrations. However the contrasts and
		colors might be affected.
Scanned images are not displayed on	When "Allow automatic blank page	Right click "ScanSnap Manager" icon on
the screen (when “Allow automatic	removal" is enabled, almost blank	the task bar, select [Setting...] - [Scanning]
blank page removal" is enabled).	documents with only a few characters may	tab and click the [Option...] button. Then
	be accidentally recognized as blank pages	clear the "Allow automatic blank page
	and removed from scanned image data.	removal" check box.
Scanned images are skewed (when	Are the documents fed into the ADF skewed	The "Allow automatic image deskew"
"Allow automatic image deskew" is	more than +-5 degrees?	function can correct skewed images up to
enabled).		+-5 degrees. Load the document onto the
		scanner so that the document skew does not
		exceed this limit.
		If it does not improve even after you have
		tried this method, clear the check box for
		"Allow automatic image deskew" on
		[Option] of the [Scanning] tab of [Scan and
		Save Settings].
	Depending on the contents of document, the	Refer to Operator’s Guide section 3.4.
	automatic image deskew may not work
	properly.
The orientation of scanned documents	Depending on the contents of document, the	Refer to Operator’s Guide section 3.4
is not displayed correctly (when	automatic image rotation may not work
“Allow automatic image rotation” is	properly.
enabled).

*1) For Windows XP, From "Device Manager", right click on computer name an perform “Scan for hardware changes".

*2) Confirm that PC and ScanSnap are powered on and connected properly.

-From Device Manager, check if ScanSnap is recognized as unknown device. If so, delete it from [Control Panel] - [System].

-Close ScanSnap Manager

-Go to [Control Panel] - select [Add or remove Programs] and uninstall ScanSnap Manager and ScanSnap Organizer. (Refer to Operator’s Guide section 4.1.)

-Before restarting your PC, remove the following folders and files.

When you delete the following folders and files, pay extra attention not to remove any other folders or files, since this will affect your system environment.

For Windows 2000, Windows XP:

Delete the folder ScanSnap under:

c:\Documents and Settings\<User name>\Application Data\PFU\ Delete the folder Driver under:

c:\Program Files\PFU\ScanSnap\

For Windows 98, ME:

Delete the folder Driver under: c:\Program Files\PFU\ScanSnap\

After you have removed the above given folders, please confirm if the files

-fi5110e.INT

-fi5110e.PNF

14