Fujitsu fi-5110EOX2 manual Replacing the Pick Roller, Sheet guide Handle Claw, Pick roller bushing

5.Close the ADF cover

ADF cover

ÖYou should hear the ADF cover click into position when it returns to its original position.

6.Turn on the scanner.

ÖScanSnap Manager icon changes from to S .

7.Right click the "ScanSnap Manager" icon S on the task tray, and select [Check consumable supplies] from the menu.

8.In the “Check consumable status” window, click the [Reset] button of Pad ASSY Count.

ÖThe counter is reset to “0”.

6.3.Replacing the Pick Roller

Replace the Pick roller following the procedure below.

1.Remove the document on the Paper chute cover.

2.Open the ADF cover while pulling the Cover open lever.

Paper chute cover

ADF cover

Cover open lever

3.Remove the Sheet guide.

Pinch the handle on the Sheet guide to remove it.

Sheet guide

Handle

Claw

4.Rotate the Pick roller bushing (Left) in the direction of the arrow.

	Pick roller bushing
Pick roller	Pick roller shaft

5.Remove the Pick roller with its shaft.

Hold the left part of the shaft, and raise it to remove the shaft from the scanner while pulling the shaft to the left.

Pick roller shaft Pick roller

If the around the pick roller is dirty by paper -powder, it may cause a scanning error. Please remove the dirt using a dry cloth with dollop of Cleaner F1.

* Don't use water, mild detergent or air-spray.

ScanSnap fi-5110EOX2 Getting Started 19