Tools and Equipment Needed

To install the system, you must have the following tools:

■No. 2 Phillips screwdriver

■ESD mat and grounding strap

In addition, you must provide a system console device, such as one of the following:

■ASCII terminal

■Workstation

■Terminal server

■Patch panel connected to a terminal server

Optional Component Installation

The standard components of the server are installed at the factory. However, if you ordered options such as additional memory or PCI cards, these will be shipped separately. If possible, install these components prior to installing the server in a rack.

If you ordered any options that are not factory-installed, see the SPARC Enterprise T5120 and T5220 Servers Service Manual for installation instructions.

Note – The list of optional components can be updated without notice. See the product web pages for the most current list of components supported in the server.

Chapter 1 Preparing for Installation 3