▼To Log Into the Service Processor Using the Serial Management Port

After the service processor boots, access the ILOM CLI to configure and manage the system. The ILOM CLI prompt (->) is displayed at the first time the service processor is booted. The default configuration provides an ILOM CLI root user account. The default root password is changeme. Change the password using the service processor ILOM CLI password command.

1.If this is the first time the system has been powered on, use the password command to change the root password.

...

Starting OpenBSD Secure Shell server: sshd.

Starting Servicetags listener: stlistener.

Starting FRU update program: frutool.

hostname login: root

Password: changeme

Copyright 2007 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.

...

Federal Acquisitions: Commercial Software -- Government Users Subject to Standard License Terms and Conditions.

...

Warning: password is set to factory default.

-> set /SP/users/root password

Enter new password: ********

Enter new password again: ********

->

Note – After the root password has been set, on subsequent reboots, the ILOM CLI login prompt is displayed.

Chapter 3 Powering On the System 47