Slide Rail Assembly Notes for the Express Rail Rackmounting Kit

The Express rail rackmount kit has two slide rail assemblies. A slide rail assembly can be installed on either the right or left side of the rack.

Each slide rail assembly consists of a three-section slide rail and a removeable mounting bracket (FIGURE C-1).

FIGURE C-1Sections of the Express Rail Slide Rail Assembly

1

2 3 4

Figure Legend

1Mounting bracket

2Front section

3Middle section

4Rear section

■The front, middle, and rear sections form the slide rail. The middle and rear sections have holes for mounting and adjust to fit rack depths from 24 in. (61 cm) to 36.5 in. (93 cm). The front section can be extended to allow movement of the server out of the rack.

68 SPARC Enterprise T5120 and T5220 Servers Installation Guide • August 2007