●Open an SSH session and connect to the service processor by specifying its network address.

%ssh root@xx.xxx.xx.x

...

Are you sure you want to continue connecting (yes/no)? yes

...

Password: password (nothing displayed)

Waiting for daemons to initialize...

Daemons ready

Sun(TM) Integrated Lights Out Manager

Version 2.0.0.0

Copyright 2007 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms.

->

Using the Service Processor for Common Operations

Note – For more information on using the ILOM service processor, refer to the Integrated Lights Out Manager 2.0 Supplement for SPARC Enterprise T5120 and T5220 Servers.

▼To Power On the System

1.Perform the following steps to verify that there are no faults:

a.Set the virtual keyswitch to diag mode so that POST will run in Service mode.

->set /SYS keyswitch_state=diag

Chapter 3 Powering On the System 53