d.Tighten the screws to lock the ends of the rails in place.
e.At the rear of the rack, repeat Step a through Step d. for the rear ends of the rails.
▼To Insert and Lock the Server in the Rack
1. Deploy the antitilt bar, if the chassis or rack is so equipped.
Caution – The weight of the servers on extended slide rails can be enough to overturn an equipment rack.
Caution – The 2U server weighs approximately 46 lb (20.7 kg). Two people are required to lift and mount the server into a rack enclosure when using the procedures in this chapter.
2. Insert the ends of the mounting brackets into the sliding rails (FIGURE
Chapter 2 Installing the SPARC Enterprise T5120 and T5220 Servers 23