3.Using the ILOM CLI, type the stop /SYS command to perform a graceful shutdown of the system.

-> stop /SYS

Are you sure you want to stop /SYS (y/n)? y

Stopping /SYS

->

Note – To perform an immediate and ungraceful shutdown, use the stop -force-script /SYSor stop -script /SYScommands. These commands stop everything immediately, ensure that all data is saved before entering these commands.

4. Type the start /SYS command.

-> start /SYS

Are you sure you want to start /SYS (y/n)? y

Starting /SYS

->

Note – To force a power on sequence, use the start -script /SYScommand.

5. Reconnect to the system console with the start /SP/console command.

-> start /SP/console

Are you sure you want to start /SP/console (y/n)? y Serial console started. To stop, type #.

The systems displays various messages, followed by the ok prompt.

Verifying System Functionality

After powering on the system for the first time, you can use the Sun Validation Test Suite (SunVTS™) software to verify the functionality and performance of any installed components, as well as its network connections. Refer to the SunVTS documentation at http://www.sun.com/documentation for more information.

60 SPARC Enterprise T5120 and T5220 Servers Installation Guide • August 2007