■disk3 – Specifies internal drive 3

■net, net0, net1, net2, net3 – Specifies the network interfaces

■full path name – Specifies the device or network interface by its full path name

Note – The Solaris OS modifies the boot-devicevariable to its full path name, not the alias name. If you choose a nondefault boot-devicevariable, the Solaris OS specifies the full device path of the boot device.

Note – You can specify the name of the program to be booted as well as the way the boot program operates. For more information, refer to the OpenBoot 4.x Command Reference Manual in the OpenBoot Collection AnswerBook for your specific Solaris OS release.

If you want to specify a network interface other than an on-board Ethernet interface as the default boot device, you can determine the full path name of each interface by typing either of the following commands:

ok show-devs ok show-nets

The show-devscommand lists the system devices and displays the full path name of each PCI device.

66 SPARC Enterprise T5120 and T5220 Servers Installation Guide • August 2007