CODE EXAMPLE A-1Typical Boot Sequence Following Firmware Update (Continued)

Configuring network interfaces...Internet Systems Consortium DHCP Client V3.0.1

Copyright 2007 Internet Systems Consortium.

All rights reserved.

For info, please visit http://www.isc.org/products/DHCP

eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. Listening on LPF/eth0/00:14:4f:3f:8c:af

Sending on LPF/eth0/00:14:4f:3f:8c:af

Sending on Socket/fallback

DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 eth0: link up, 100 Mbps Full Duplex, auto-negotiation complete. DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 Hostname: hostname.

Starting portmap daemon: portmap.

Initializing random number generator...done.

INIT: Entering runlevel: 3

Starting system log daemon: syslogd and klogd.

Starting periodic command scheduler: cron.

Starting IPMI Stack...... Done.

Starting OpenBSD Secure Shell server: sshd.

Starting Servicetags listener: stlistener.

Starting FRU update program: frutool.

hostname login:

64 SPARC Enterprise T5120 and T5220 Servers Installation Guide • August 2007