FIGURE 2-4Attaching a Mounting Bracket to the Chassis (Either Server)

b.With the heads of the locating pins protruding though the keyed openings in the mounting bracket, pull the mounting bracket toward the front of the chassis until the bracket locks into place with an audible click.

c.Verify that all locating pins are trapped in the keyed openings and that the correct locating pin has engaged the mounting bracket lock, as shown in the right side of FIGURE 2-4.

3.Attach the second mounting bracket to the left side of the chassis.

4.Determine which rack hole numbers to use when attaching the slide rails to the rack posts.

If the SPARC Enterprise T5120 and T5220 is two rack units tall (2U), the slide rails occupy the lower half of the 2U space.

20 SPARC Enterprise T5120 and T5220 Servers Installation Guide • August 2007