FIGURE 2-21Securing the Server Cables With the CMA and Velcro Straps (Either Server)

Caution – Verify the operation of the slide rails and CMA, and cable service loops. Perform the steps in the following procedure again before continuing: “To Verify the Operation of the Slide Rails and the CMA” on page 30.

Dismounting the Servers

To install or replace internal parts in the server, you must first remove the server from the rack. For the removal procedure, refer to the SPARC Enterprise T5120 and T5220 Servers Service Manual.

Chapter 2 Installing the SPARC Enterprise T5120 and T5220 Servers 39