68K System Monitor
User's Guide GE Energy Services
General SWM0023-1.00 -2
Full Release 3-23
DF - Display File DataPlatform oCPM oD20
D20 Base oD20 ME
D20 Base þD20/200
CCU Base oD20/200 ME
CCU Base þD25
Description Use this command to display the contents of any file in memory in text or binary
format.
The default is binary format, which mimics the dump command by displaying the
binary values first, then the printable ASCII values afterward.
You may view any file recognized by the Installable File System.
Syntax Below is usage and syntax information for this command
Command Format df [/(b | t)] filename
Variables /b = Display contents in binary format (default).
/t = Display contents as text.
Parameters filename = The full path name of the file to be displayed.
Example Type df /b config.bin and press ENTER.
Results: The monitor displays the contents of the file
config.bin in a manner similar to the dump command.
Special
Considerations
By not providing any other switch, the command selects the
binary dump format, and is identical to the dump memory
command format except that it lacks the address prefix.