GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-78 Full Release
TEST - Invoke Test Tool
Platform oCPM oD20
D20 Base oD20 ME
D20 Base oD20/200
CCU Base þD20/200 ME
CCU Base þD25
Description Use this command to activate a test tool external to the monitor.
To use a test tool, the test tool application must:
• be included in the software for the system, and
• be created specifically to make use of this monitor function.
The 68K Monitor relinquishes communications control to the test tool and waits for
the tool to complete its processing before continuing.
Syntax Below is usage and syntax information for this command
Command Format test proc_name
Variables None
Parameters proc_name = The name of the test tool process, normally
Txxx.
Example None Required
Special
Considerations
If the test tool application is suspended, the command will not
function.
The monitor must detect that the test tool is waiting for a signal
before it will proceed.