GE 68K System BOOT - Startup

68K System Monitor
User's Guide GE Energy Services
General SWM0023-1.00 -2
Full Release 3-7
BOOT - Startup
-
Platform þCPM þD20
D20 Base þD20 ME D20 Base þD20/200 CCU Base þD20/200 ME CCU Base þD25
Description Use this command to remove all defined Monitor breakpoints and then force the
system to go through its lowest level start-up.
This ensures that the system is properly re-initialized after testing, system
manipulating, or downloading.
Syntax Below is usage and syntax information for this command
Command Format CPM / D20 / D20ME / CCU/ CCUME boot
D25 boot [/i] [delay]
Variables delay = number of milliseconds to wait before the boot is
performed
Parameters /i = skip all additional system processing and reset
the system immediately
Example Type boot and press ENTER.
Results: The system responds with the normal boot-up screen.
It displays a series of messages relating to hardware
and software initialization.
Special
Considerations
This command will automatically clear all breakpoints before
execution.
This command causes all processors in a multi-processor
system to reboot.