GE 68K System ETH - Ethernet Address

68K System Monitor
User's Guide GE Energy Services
General SWM0023-1.00 -2
Full Release 3-35
ETH - Ethernet Address
Platform oCPM oD20
D20 Base oD20 ME D20 Base oD20/200 CCU Base oD20/200 ME CCU Base oD25
Description Use this command to change the Ethernet address of a D25’s hardware interfaces.
Syntax Below is usage and syntax information for this command
Command Format eth /(d | u) [b1 b2 b3 b4 b5 b6]
Variables /d = display address
/u = update address
Parameters [b1 b2 b3 b4 b5 b6] = 6 byte Ethernet address
Example Nor required
Special
Considerations
Do not use unless qualified.
Address change is permanent, and will stay in D25 XCOM
hardware even if moved to another D25.