68K System Monitor
User's Guide GE Energy Services
General SWM0023-1.00 -2
Full Release 3-17
CP - Change Priority
Platform oCPM oD20
D20 Base oD20 ME
D20 Base oD20/200
CCU Base þD20/200 ME
CCU Base þD25
Description Use this command to change the current priority of an existing process.
Syntax Below is usage and syntax information for this command
Command Format cp (/h | ((pid | PName) (delta | abs)))
Variables /h = display help
Parameters pid = PID number
PName = name of the process
delta = the priority change to be made.
A negative value reduces priority.
A positive value adds priority.
abs = the final priority of process after change in Hex
Example Type cp WES0 +20 and press ENTER.
Results: The monitor increases the priority of process WES0
by (delta) 0x20.
Note: Process/Task names, like WES0, are case-sensitive.
Special
Considerations
If you use this command to change the priority of the IDLE
process, the system will reboot.