GE 68K System PRG - Program Flash

68K System Monitor
User's Guide GE Energy Services
General SWM0023-1.00 -2
Full Release 3-49
PRG - Program Flash
Platform oCPM oD20
D20 Base oD20 ME D20 Base oD20/200 CCU Base þD20/200 ME CCU Base oD25
Description Use this command to program a FLASH memory.
Syntax Below is usage and syntax information for this command
Command Format prg [/(b | w | l)] address data
Variables /b = bytes (octets), the default mode
/w = words
/l = long words
Parameters address = address at which to store the data, in hexadecimal
data = the data to store
Example Not Required
Special
Considerations
Use with great care. Command will change contents of Flash
memory without updating checksum.