GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-62 Full Release
RTC - Test CCU RTC
Platform oCPM oD20
D20 Base oD20 ME
D20 Base oD20/200
CCU Base oD20/200 ME
CCU Base oD25
Description Use this command to test the RTC synchronization between nodes in a D200.
Syntax Below is usage and syntax information for this command
Command Format rtc [/r]
Variables /r = reset back to initial settings
Parameters None
Example At the monitor prompt, type rtc /r and press ENTER.
Special
Considerations
None