| 68K System Monitor |
GE Energy Services | User's Guide |
|
|
JTF - Jump To Flash
Platform
Description
o CPM o D20 | o D20 ME | o D20/200 | o D20/200 ME | þ D25 |
D20 Base | D20 Base | CCU Base | CCU Base |
|
Use this command to place the D25 in Active Mode.
The system stops execution out of the BootROM region, and it activates the FLASH operating system.
Syntax
!
WARNING
Below is usage and syntax information for this command
Command Format | jtf | ||
Variables | None | ||
|
|
|
|
Parameters | None | ||
|
| ||
Example | Type jtf and press ENTER. | ||
| Type yes to confirm. | ||
|
|
|
|
|
|
|
|
| Results: The system returns to FLASH operation mode. |
|
|
Special | The system must be operating out of BootROM to use this |
Considerations | command. |
| The system halts and deletes all applications currently |
| executing on the RTU when activating the FLASH operating |
| system. |
|
|
This command causes the D25 to shift into active mode immediately, without performing any checks on FLASH.
Be sure that your FLASH region contains valid application data before invoking this command.
SWM0023 1.00 2 | General |
Full Release | |
|
