68K System Monitor
User's Guide GE Energy Services
General SWM0023-1.00 -2
Full Release 3-43
JX - Jam Exchange
Platform þCPM þD20
D20 Base þD20 ME
D20 Base þD20/200
CCU Base þD20/200 ME
CCU Base þD25
Description Use this command to force a message to the beginning of the message queue at one
or more exchanges.
Syntax Below is usage and syntax information for this command
Command Format CPM / D20 / D25: jx (xid | name) m2 m3 m4 m5
CCU / CCUME: jx (xid | gxid | name) m2 m3 m4 m5 [/g]
Variables /g = Allows the message to be jammed into a queue in
a different node
Parameters xid = pSOS exchange ID (in hexadecimal); send
message to a specific exchange.
gxid = global exchange ID (in hexadecimal); send
message to a specific exchange.
name = case-sensitive exchange name. The command
supports the new exchange naming convention. If
you enter an entire name, the monitor sends the
message to that exchange. If you enter the first
few characters, the command attempts pattern
matching. It sends the message to one or more
exchanges depending on the number of matches.
m2 - m5 = first through fourth long words in the body of the
message, in hexadecimal.
Example Type jx 304540 1 2 3 4 and press ENTER.
This sends a message to an exchange identified as 304540. The
command sets the first two reserved messages to 0.
Results: Unless it encounters an error, the system displays the
prompt. In the case of an error, it displays an error
message before the prompt.
Special
Considerations
You must only use this command in a testing or debugging
context. If you send an indiscriminate message to an exchange,
you cannot predict the results.