GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2 General
3-76 Full Release
SX - Send Exchange
Platform þCPM þD20
D20 Base þD20 ME
D20 Base þD20/200
CCU Base þD20/200 ME
CCU Base þD25
Description Use this command to queue a message at one or more exchanges.
Syntax Below is usage and syntax information for this command
Command Format CPM / D20 / D25: sx (xid | name) m2 m3 m4 m5
CCU / CCUME: sx (xid | gxid | name) m2 m3 m4 m5 [/g]
Variables /g = Allows the message to be sent to a queue in a
different node
Parameters xid = pSOS exchange ID (in hexadecimal); send
message to a specific exchange.
gxid = global pSOS exchange ID (in hexadecimal); send
message to a specific exchange.
name = case-sensitive exchange name. The command
supports the new exchange naming convention.
If you enter an entire name, the system sends the
message to that exchange.
If you enter the first few characters, the
command attempts pattern matching. The system
sends the message to one or more exchanges,
depending on the number of matches.
m2 - m5 = first through fourth long words in the body of the
message, in hexadecimal.
Example Type sx 304540 1 2 3 4 and press ENTER.
This sends a message identified as 304540. The command sets
the first two reserved messages to 0.
Results: The system displays the prompt unless it encounters
an error. In this case, it displays an error message
before displaying the prompt.
Special
Considerations
You must only use this command in a testing or debugging
context. If you send a message to an exchange
indiscriminately, you cannot predict the results.