GE 68K System manual Regular Keyboard Input

68K System Monitor

User's Guide GE Energy Services

Command Input and Response, Continued

Regular Keyboard Input (continued)

Special Control Characters

You can use these special control characters to perform advanced editing and screen navigation functions.

Command	Characters		Description
Abort	CTRL-C	returns the Monitor to the command line prompt
		and aborts most commands being processed.
		Note:	a CTRL-Ccommand does not work in
			a TELNET connection.
Delete	CTRL-D	deletes the current character of the previous
		command line.
Insert	CTRL-I or	toggles the current mode to/from overwrite or
	TAB	insert. The monitor always starts in overwrite
		mode.

Advance	CTRL-A	causes the monitor to copy the character from
		the previous command buffer reference location
		to the current location in the input command
		buffer.
		This character also returns the monitor to
		overwrite mode.
Repeat	CTRL-R	allows editing and re-execution of the previous
		command by copying the previous command
		line from the character at the previous
		command reference location (up to the end of
		the previous command buffer) into the current
		input command buffer
		Note:	D20ME and D25 have a 5-line
			command buffer.
Execute	CTRL-X	copies the most previously used command to
		the command line and executes it.
Xoff, Xon	CTRL-S	the combination of CTRL-S(Xoff) and CTRL-Q
	and CTRL-Q	(Xon) stops and starts scrolling of the monitor’s
		display.

General SWM0023-1.00 -2

Full Release 1-5