GE EPM 5200 Resetting Hour Readings, Accessing the LM1/LM2 Set Limits, Step, b. Press PHASE/NEXT

CHAPTER 5: OVERVIEW

5.7: Resetting Hour Readings

MAX	AC VOLTS
	A B C A B C
MIN
	N N N B C A
LM1
LM2	AC AMPS
	A B C N
	POWER

			PF
			KW
			KVA
KVAH	KWH	FREQ	KVAR
MAX/MIN	VOLTS AMPS	POWER PHASE
LIMITS			NEXT

MAX	AC VOLTS
		A B C A B C
MIN		N N N B C A
LM1
LM2		AC AMPS
		A B C N
		POWER
			PF
			KW
			KVA

KVAH	KWH	FREQ	KVAR
MAX/MIN	VOLTS AMPS	POWER PHASE
LIMITS			NEXT

MAX	AC VOLTS
	A B C A B C
MIN
	N N N B C A
LM1
LM2	AC AMPS
	A B C N
	POWER

			PF
			KW
			KVA
KVAH	KWH	FREQ	KVAR
MAX/MIN	VOLTS AMPS	POWER PHASE
LIMITS			NEXT

MAX	AC VOLTS
	A B C A B C
MIN
	N N N B C A
LM1
LM2	AC AMPS
	A B C N
	POWER

PF

KW

KVA

KVAH KWH FREQ KVAR

MAX/MIN	VOLTS AMPS	POWER PHASE
LIMITS		NEXT

Step 1:	Step 2:		Step 3:
a. Press POWER once.	a. Press		a. While the question
b. Press PHASE/NEXT	MAX/MIN/LIMITS		marks are displayed,
	•	once for positive	press PHASE/NEXT. A
for the desired hour	•	hour reset	password entry is now
function.		three times for	required.
!This example uses		negative hour reset.	!The password is 005.
	! Four question marks
KWH function.			b. Press PHASE/NEXT
	appear in lower display.
			each time a password
			digit appears.

!Checkmarks appear, indicating a successful reset.

5.8: Accessing the LM1/LM2 Set Limits

The EPM 5300P has two manual set limits which monitor the instantaneous readings and warn the user of any abnormal conditions. Each limit detects readings either above or below a set level. The EPM 5200P does not have this feature.

SET LIMITS: Point when the relay changes position, if the EPM 5300P is equipped with the Relay Option (Suffix -NL).

If a limit is exceeded, only the annunciator for LM1 and/or LM2 flash.

To view the setup of the LM1/LM2 set limits:

•Press MAX/MIN/LIMITS 2 times. to view the LM1 set limit momentarily.

•Press MAX/MIN/LIMITS 3 times to view the LM2 set limit momentarily.

•To locate readings that exceeded Limit 1, press MAX/MIN/LIMIT 3 times and then press PHASE/NEXT. The display blanks, the middle display indicates L1, and annunciators for parameters that exceeded Limit 1 illuminate.

•To locate readings that exceeded Limit 2, press MAX/MIN/LIMIT 4 times and then press PHASE/NEXT. The display blanks, the middle display indicates L2, and annunciators for parameters that exceeded Limit 2 illuminate.

32 EPM 5000 series Advanced Power Meters GE Multilin