GE EPM 5200, EPM 5300, EPM 5350 instruction manual Group 1, Function 1-Amperage Full Scale, Ct T Ype

CHAPTER 10: PROGRAMMING GROUP 1

10.2: Group 1, Function 1—Amperage Full Scale

CT TYPE	FULL SCALE
Direct Input	05.00 A
600/5	0600 A
1000/5	1000 A
2000/5	2000 A
3000/5	03.00 KA
5000/5	05.00 KA

Table 10-3: Full Scale Settings for Amps

Also note that the meter reads with digital accuracy to a 2000 count range. Thus all CT and PT full scale settings in the meter should reflect that limitation. The table above shows the proper settings.

To change the Full Scale Settings:

NOTE: Press MAX/MIN/LIMITS at any time to cancel before storing the last digit or switch.

MAX	AC VOLTS
	A B C A B C
MIN	N N N B C A
LM1
LM2	AC AMPS
	A B C N
	POWER

				PF
				KW
				KVA
KVAH	KWH		FREQ	KVAR
MAX/MIN	VOLTS	AMPS	POWER	PHASE
LIMITS				NEXT

Step 1:

a. Enter Group Level of Programming Mode (see Chp. 8).

b. Press MAX/MIN/LIMITS until 1. appears in upper display.

MAX	AC VOLTS
	A B C A B C
MIN	N N N B C A
LM1
LM2	AC AMPS
	A B C N
	POWER

PF

KW

KVA

KVAH KWH FREQ KVAR

MAX/MIN			PHASE
LIMITS	VOLTS	AMPS	POWER
			NEXT

Step 2:

a. Press AMPS to activate the Group.

b. Press MAX/MIN/LIMITS until 11. appears in upper display.

!Middle display indicates Scale Factor Setting.

!Lower display indicates Full Scale.

62 EPM 5000 series Advanced Power Meters GE Multilin