GE EPM 5300 PROGRAMMING GROUP 2 - METER CALIBRATION, For Amps Low End Function, Step, See to Exit

CHAPTER 11: PROGRAMMING GROUP 2 – METER CALIBRATION

MAX	AC VOLTS
	A B C A B	C
MIN
	N N N B C A
LM1
LM2	AC AMPS
	A B C N
	POWER

			PF
			KW
			KVA
KVAH	KWH	FREQ	KVAR
MAX/MIN	VOLTS AMPS	POWER	PHASE
LIMITS			NEXT

MAX	AC VOLTS
	A B C A B	C
MIN
	N N N B C A
LM1
LM2	AC AMPS
	A B C N
	POWER

			PF
			KW
			KVA
KVAH	KWH	FREQ	KVAR
MAX/MIN	VOLTS AMPS	POWER	PHASE
LIMITS			NEXT

Step 3:

a. Press AMPS to activate calibration.

!Digits move to middle display.

!After a moment, digits appear in lower display also.

Step 4:

a. Press POWER to increase the value and PHASE/NEXT to decrease the value.

!Digits in lower display disappear momentarily, then reappear indicating the new value.

b. Press AMPS to store and move to the next phase or Amp within the group.

See Chapter 14 to Exit.

For Amps Low End (Function 2):

NOTE: Press MAX/MIN/LIMITS at any time to cancel before storing the last digit or switch.

MAX				AC VOLTS
				A B C A B C
MIN				N N N B C A
LM1
LM2				AC AMPS
					A B C N
						POWER
							PF
							KW
							KVA
	KVAH	KWH	FREQ				KVAR

MAX/MIN	VOLTS	AMPS	POWER	PHASE
LIMITS				NEXT

Step 1:

a. Enter Group Level of Programming Mode (see Chp. 8).

b. Press MAX/MIN/LIMITS until 2. appears in upper display.

c. Press AMPS to activate the Group.

!A one digit password is required to continue.

d. Press VOLTS until 5 appears.

e.Press AMPS to select.

MAX	AC VOLTS
	A B C A B	C
MIN
	N N N B C A
LM1
LM2	AC AMPS
	A B C N
	POWER

			PF
			KW
			KVA
KVAH	KWH	FREQ	KVAR
MAX/MIN	VOLTS AMPS	POWER	PHASE
LIMITS			NEXT

Step 2:

a. Press MAX/MIN/LIMITS until 22. appears in upper display.

b. Press AMPS to activate. (Calibration begins with Amps A, then moves to B and C).

!Middle and lower displays blank.

GE Multilin EPM 5000 series Advanced Power Meters 69